) Heat analysis 2) The maximum content of Nb+V+Ti shall not exceed 0.220%. 3) If agreed in the order, the sulphur content is 0.00% max. ) The tensile test values given in the table apply to longitudinal samples. 2) In case the thickness is >8 mm, the yield strength values may be reduced by 20 N/mm2.
S650MC hot rolling carbon low-alloy high strength steel design by reducing the carbon equivalent of the steel and welding crack sensitivity index, and use of advanced smelting equipment and technology to strengthen the collection of micro-alloying technology, good weldability.
Strenx™ 650 MC is a hot-rolled structural steel made for cold forming, with a minimum yield strength of 650 MPa for stronger and lighter structures. Strenx 650 MC meets or exceeds the requirements of S650MC in EN 10149-2. Typical applications include a wide range of components and parts, such as demanding load-bearing structures. Strenx 650 MC comes in coils, slit coils or cut-to-length sheets.
Brand Strenx®S650MC are featured with high strength ,excellent forming and welding performence and high dimension . accuracy and surface-turers to make automobile parts,safety boxes or crane booms.With excellent refiing and . rolling techniques,Baosteel makes these steels feature in refined structure,good bending and welding performance
S650MC High-strength steels for cold-forming, thermomechanically-rolled Mechanical properties4) Yield strength5) ReH ≥ 650 MPa Tensile strength Rm 700 – 880 MPa Total elongation A 806) ≥ 10 % Total elongation A 56) ≥ 12 % 1) The tensile test values given in the table apply to longitudinal samples. 2) In case the thickness is > 8 mm, the yield
Material name S650MC Proprietary brand HSM 650 Delivery specification DIN EN 10149-2 Application Steels with very good forming, fine blanking and welding properties General delivery options Coil inner diameter standard 508 mm / optional 610 mm Coil outer diameter max. 1,890 mm Coil weight max. 20.5 kg/mm strip width Strip width max. 720 mm
S650MC High-strength steels for cold-forming, thermomechanically-rolled Mechanical properties4) Yield strength5) ReH ≥ 650 MPa Tensile strength Rm 700 – 880 MPa Total elongation A 806) ≥ 10 % Total elongation A 56) ≥ 12 % 1) The tensile test values given in the table apply to longitudinal samples. 2) In case the thickness is > 8 mm, the yield
S650MC hot rolling carbon low-alloy high strength steel design by reducing the carbon equivalent of the steel and welding crack sensitivity index, and use of advanced smelting equipment and technology to strengthen the collection of micro-alloying technology, good weldability.
Strenx™ 650 MC is a hot-rolled structural steel made for cold forming, with a minimum yield strength of 650 MPa for stronger and lighter structures. Strenx 650 MC meets or exceeds the requirements of S650MC in EN 10149-2. Typical applications include a wide range of components and parts, such as demanding load-bearing structures. Strenx 650 MC comes in coils, slit coils or cut-to-length sheets.
Material name S650MC Proprietary brand HSM 650 Delivery specification DIN EN 10149-2 Application Steels with very good forming, fine blanking and welding properties General delivery options Coil inner diameter standard 508 mm / optional 610 mm Coil outer diameter max. 1,890 mm Coil weight max. 20.5 kg/mm strip width Strip width max. 720 mm
S650MC hot rolling carbon low-alloy high strength steel design by reducing the carbon equivalent of the steel and welding crack sensitivity index, and use of advanced smelting equipment and technology to strengthen the collection of micro-alloying technology, good weldability.
The tensile strength of S650MC steel plate is from 700 to 800MPa and S650MC steel is equivalent to Salzgitter Flachstahl standard PSQ65 steel and FK standard D steel. S650MC Steel plate,S650MC Steel pipe - Steel Exporter BeBon China
Consumables are classified in the EN and AWS standards. The classification is based on the welding process used, with specific standards for the different processes. For example, EN ISO 2560 “Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels.
Strenx® is a high-strength, high-performance structural steel that helps make products stronger, lighter and more sustainable.
S355MC is a German low carbon alloy steel, comprehensive performance, low temperature performance, cold stamping performance, welding performance and cutting performance. Widely used in bridges, vehicles, ships, construction, pressure vessels. The yield value is about 355MPa. And the yield value decreases as the thickness of the material increases.
appropriate for the steel grade in question. after welding, these steels usually need to be annealed. optim steels produced as strip products do not require an increased working temperature in engineering work - shop conditions. prior to welding, however, it should be ensured that the grooves to be welded are dry and • Welding. General
S500MC ( 1.0984 ) The sum of Nb, V and Ti shall be max 0.22 % If agreed at the time of the enquiry and order the sulfur content shall be max 0.01 % (ladle analysis) C Si Mn P S V Nb TiAl max 0.12max 0.5max 1.7max 0.025max 0.015max 0.2max 0.09max 0.15min 0.015.
metals that can be used for welding of Domex 650 MC, which gives a weld that can meet the same minimum tensile strength requirements as the base metal. Some examplesof different filler metals that can be used are tabulated below. HEAT TREATMENT Stress relief annealing should be carried out within the tem-perature range of 530 - 580 °C.
Equipped with advanced cutting, bending and welding equipment, devoted to meet customers’ special requirements and provide OEM, ODM services. With 2000000 tons diverse steel stock, we pursue to provide the mostly competitive design and processing solutions for customers.
1.Wall Thickness:1.2-150mm
2.Size:1000*2000mm / 1220*2440mm / 1250*2500mm / 1500*3000mm
3.Packaging Details:Standard export seaworthy packing or as required.
4.Application: construction decoration and industry instruments
Copyright © 2020.SSY Steel All rights reserved.More Templates
Related steel
for building decoration st52 3 bridge distributor
ss400 mild steel plate for construction
astm a36 hot rolled sheet steel 3mm mild steel
porforated plated galvanized steel pipes
checkered plate with tear drop pattern price
steel grade dh36
galvanised seamless steel
a537cl1 manufacture
a588 gr b corten steel specification
en p355nb 1 0557 gas cylinder steel exporter
welded tube 666 china manufacture steel
jis g 4304 sus 321 dealer